vmware/esxi-version¶
Set the ESXi software install acceptance level.
This Param can be used to specify which supported version of
VMware vSphere to install on a given Machine. Note that the
version must be a supported BootEnv (the version matches the
BootEnv, minus the -install
trailer) type on the DRP Endpoint.
See the documentation for "select-vendor" special BootEnv
behavior selection below.
Supported versions are:
- select-vendor
- esxi_550u3b-3248547_vmware
- esxi_600u2-3620759_vmware
- esxi_600u3a-5572656_vmware
- esxi_650a-4887370_vmware
- esxi_650u1-7388607_hpe
- esxi_650u2-10719125-A07_dell
- esxi_650u2-8294253-A00_dell
- esxi_650u2-8294253_vmware
- esxi_670-8169922_vmware
- esxi_670u1-10302608_cisco
- esxi_670u1-10302608_fujitsu
- esxi_670u1-10302608_hitachi_blade_ha8000
- esxi_670u1-10302608_hitachi_ha8000v-gen10
- esxi_670u1-10302608_lenovo
- esxi_670u1-10302608_nec
- esxi_670u1-10302608_vmware
- esxi_670u1-10764712-A04_dell
- esxi_670u1-11675023_hpe_gen9plus
- esxi_670u2-13006603_vmware
- esxi_670u2-13006603_cisco
- esxi_670u2-13006603_hitachi
- esxi_670u2-13006603_hpe
- esxi_670u2-13473784_fujitsu
- esxi_670u2-13644319_nec_r120h-t120h-r110j
- esxi_670u2-13644319_nec_standard
- esxi_670u2-13981272-A02_dell
- esxi_670u2-13981272_lenovo
- esxi_670u3-13981272-A03_dell
- esxi_670u3-14320388_cisco
- esxi_670u3-14320388_fujitsu
- esxi_670u3-14320388_hpe
- esxi_670u3-14320388_lenovo
- esxi_670u3-14320388_nec_r120h-t120h-r110j
- esxi_670u3-14320388_nec_standard
- esxi_670u3-14320388_vmware
- esxi_670u3-15160138_lenovo
- esxi_670u3b-15160138_vmware
- esxi_700-15843807_dell
- esxi_700-15843807_hpe
- esxi_700-15843807_vmware
- esxi_700u1-16850804_vmware
- esxi_700u1-x16850804_vmware
- esxi_700u1-16850804_cisco
- esxi_700u1-16850804_dell
- esxi_700u1-16850804_hpe
- esxi_700u1-16850804_lenovo
NOTICE: The following BootEnvs have been removed from the vmware plugin and are no longer supported:
- (*) esxi-550u3b
- (*) esxi-6.7.0-update1-10302608-custom-hitachi_0200_Blade_HA8000
- (*) esxi-6.7.0-update1-10302608-custom-hitachi_1200_HA8000VGen10
- (*) esxi-6.7.1-10302608-nec-6.702
- (*) esxi-6.7.1-10302608-nec-gen-6.7
- (*) esxi-600u2
- (*) esxi-600u3a
- (*) esxi-650a
- (*) esxi-650u2
- (*) esxi-670
- (*) esxi-670u1
- (*) esxi-670u2
- (*) esxi-dellemc-esxi-6.5u2-10719125a07
- (*) esxi-dellemc-esxi-6.7u1-10764712-a04
- (*) esxi-fujitsu-vmvisor-installer-6.7-10
- (*) esxi-hpe-esxi-6.7.0-update1-iso-gen9p
- (*) esxi-lenovo_esxi6.7u1-10302608_201810
- (*) esxi-vmware-esxi-6.7.0-10302608-custom-cisco
If nothing is specified, the default value will be selected in the
default
field of the Param.
If the operator specifies select-vendor
then the latest Vendor
specific BootEnv / ISO combo will be used according to the Param
map vmware/esxi-version-vendor-map
. The vendor version
requires gohai-inventory
to match DMI->System->Manufacturer
appropriately.